Project Details

Filler-img

Linear Shaft is the guiding effect of sliding bearing, which can make the products of linear motion.

The necessary conditions required by the linear motion system is: simple design, the best performance, low maintenance cost, using the selected durable material, high-frequency heat treatment, the accurate outside diameter size, roundness, really straight and surface treatment, etc.

Project Specification

Material: Bearing Steel GCr15, high Carbon Steel 45#, SUS440C
Hardness HRC60 ± 2
Hardened layer thickness: 0.8mm-3mm
Length: 0-6000mm (If you need above 6000mm,we can anti-connect for you)
Precision: g6
Roughness: Within 1.5μm
Straightness: Not excess 1.5μm of 100mm (Rmax)

Other linear shaft type Solid shaft, hollow shaft, threaded shaft, stainless steel shaft

  • Vivamus elementum semper.
  • Aenean vulputate eleifend tellus.
  • Integer tincidunt.
  • Vivamus elementum semper.
  • Aenean vulputate eleifend tellus.
  • Integer tincidunt.

Project Description

Special Machining for Linear Shaft.

1. For the Length
We can offer linear shaft with diameterφ5mm-φ150mm. Maxium length up to 6000mm.
When you are special requirements on length, we can meet your machining requirements with different length.
When you request above 6000mm, we can anti-connect for you.

2. For Special Processing
When you have special requirements on machining.

Such as threading, coaxial holes drilled and tapped, radial holes drilled and tapped, reduced shaft diameter etc, we can machine for you, and these special machines are finished after heat treatment and hard chromic so that ensure the precision of product.

When you are special requirements on machining,such as threading,coaxial holes drilled and tapped,radial holes drilled and tapped,reduced shaft diameter etc.,we can machine for you,and these special machines are finished after heat treatment and hard chromic so that ensure the precision of product.Send us your detailed sketch or blue print for propmt quotatime and action,you should be satisfied with our service

Linear Shaft Application:

1. Solid shaft
Generally applicable to industrial robots, as a professional measuring instruments, medical equipment, precision machine tools, aircraft shaft, pneumatic mandrel movement part.

2. Hollow shaft
With its weight to reduce equipment, simplify the structure of the advantages, you can then wear the internal measurement of wire, compressed air, can also add lubricants and hydraulic oil.

3. Stainless steel shaft
It’s generally suitable for use as a part of the measurement in the presence of chemicals such as chemicals, seawater and other

Substances.
Special machining shafts are finely finished after heat treatment with hard chrome plating for all types of automation equipment.

X